Volume 42 Issue 4
Aug.  2022
Turn off MathJax
Article Contents
Article Navigation >  Chinese Journal of Space Science  > 2022  >  42(4): 812-823
WEI Qiang, LIU Yue, XIA Chaoqun. Progress of Materials Science in Space Technology in China (2020–2022). Chinese Journal of Space Science, 2022, 42(4): 812-823 doi: 10.11728/cjss2022.04.yg25
Citation: WEI Qiang, LIU Yue, XIA Chaoqun. Progress of Materials Science in Space Technology in China (2020–2022). Chinese Journal of Space Science, 2022, 42(4): 812-823 doi: 10.11728/cjss2022.04.yg25
shu

Progress of Materials Science in Space Technology in China (2020–2022)

doi: 10.11728/cjss2022.04.yg25
  • 1.

    Key Laboratory of Hebei Province on Scale-span Intelligent Equipment Technology, School of Materials Mechanical Engineering, Hebei University of Technology, Tianjin, 300401

  • 2.

    State Key Laboratory of Reliability and Intelligence Electrical Equipment,Hebei University of Technology, Tianjin, 300401

  • 3.

    School of Materials Science and Engineering, Hebei University of Technology, Tianjin, 300130

Funds:  Supported by the National Natural Science Fundation of China (51873146)
More Information
    Abstract
  • In this paper, the main research work and related reports of materials science research in China’s space technology field during 2020–2022 are summarized. This paper covers Materials Sciences in Space Environment, Materials Sciences for Space Environment, Materials Behavior in Space Environment and Space experimental hardware for material investigation. With the rapid development of China’s space industry, more scientists will be involved in materials science, space technology and earth science researches. In the future, a series of disciplines such as space science, machinery, artificial intelligence, digital twin and big data will be further integrated with materials science, and space materials will also usher in new development opportunities.

     

    • FullText(HTML)
  • loading
    • References(53)
  • [1]
    HE Shiyu, YANG Dezhuang, JIAO Zhengkuan. Handbook of Space Materials (Vol. 1)-Physical State of Space Environment[M]. Beijing: China Astronautic Publishing House, 2012
    [2]
    DANIEL H, HENRY G. Spacecraft-Environment Interactions[M]. YANG Xiaoning, HUANG Jianguo, trans. Beijing: China Astronautic Publishing House, 2020
    [3]
    YANG Xiaoning, YANG Yong. Space Environment Engineering for Spacecraft[M]. Beijing: Beijing Institute of Technology Press, 2018
    [4]
    HE Shiyu, YANG Dezhuang. Handbook of Space Materials (Vol. 2) - Space Environment and Effect Calculation and Ground Simulation Test[M]. Beijing: China Astronautic Publishing House, 2021
    [5]
    FEUERBACHER B, HAMACHER H, NAUMANN R J. Materials Sciences in Space: A Contribution to the Scientific Basis of Space Processing[M]. Berlin: Springer, 1986. DOI: 10.1007/978-3-642-82761-7
    [6]
    PAN Mingxiang, WANG Weihua. Special topic: materials science in space[J]. Scientia Sinica Physica, Mechanica & Astronomica, 2020, 50(4): 047001
    [7]
    RUAN Ying, HU Liang, YAN Na, et al. Recent advances and future perspectives of space materials science[J]. Scientia Sinica Technologica, 2020, 50(6): 603-649
    [8]
    XING Yan, WANG Xiangke. Spacecraft Materials[M]. Beijing: Beijing Institute of Technology Press, 2018: 5
    [9]
    SHEN Zicai, GAO Hong, OUYANG Xiaoping. Connotation and system construction of aerospace material engineering[J]. Aerospace Materials & Technology, 2018, 48(2): 1-6 doi: 10.12044/j.issn.1007-2330.2018.02.001
    [10]
    ZHAO Xiaolei, WANG Weili, SHA Sha, et al. Rapid solidification and physical properties of a refractory Mo-Ni alloy under containerless microgravity condition[J]. Scientia Sinica Technologica, 2021, 51(9): 1127-1134 doi: 10.1360/SST-2021-0161
    [11]
    YAN Pengxu, WANG Weili, YAN Na, et al. Microstructural evolution and mechanical properties of rapidly solidified Ni-Ge alloys[J]. Scientia Sinica Technologica, 2020, 50(8): 1042-1054 doi: 10.1360/SST-2020-0022
    [12]
    WANG Gong, LIU Yifei, CHENG Tianjin, et al. Application of additive manufacturing technology for space[J]. Chinese Journal of Space Science, 2016, 36(4): 571-576 doi: 10.11728/cjss2016.04.571
    [13]
    WANG Zhen, LI Jingyang, ZHANG Jianchao, et al. Research on the space application of fused deposition modeling[J]. Aerospace Materials & Technology, 2020, 50(2): 90-93 doi: 10.12044/j.issn.1007-2330.2020.02.017
    [14]
    ZHAI Yuanyuan, FANG Lei. China completes the first space 3D printing of continuous fiber reinforced composite materials[J]. Journal of Henan Science and Technology, 2020(13): 1 doi: 10.3969/j.issn.1003-5168.2020.13.002
    [15]
    LI B, JI P F, CHEN B H, et al. The effect of Zr addition on the microstructure evolution and mechanical properties of hot-rolled TiAlNbZr alloy[J]. Materials Science and Engineering:A, 2021, 828: 142114 doi: 10.1016/j.msea.2021.142114
    [16]
    WANG F, WANG S T, CHEN B H, et al. Effect of Ti addition on the mechanical properties and microstructure of novel Al-rich low-density multi-principal-element alloys[J]. Journal of Alloys and Compounds, 2022, 891: 162028 doi: 10.1016/j.jallcom.2021.162028
    [17]
    MA W, WANG F, CHEN B H, et al. Thermal compression behavior and microstructural evolution of Ti-30-5-3 alloys in lower α + β region[J]. Materials Letters, 2021, 297: 129876 doi: 10.1016/j.matlet.2021.129876
    [18]
    JI P F, LIU S G, SHI C B, et al. Synergistic effect of Zr addition and grain refinement on corrosion resistance and pitting corrosion behavior of single α-phase Ti-Zr-based alloys[J]. Journal of Alloys and Compounds, 2022, 896: 163013 doi: 10.1016/j.jallcom.2021.163013
    [19]
    CHEN R, AN Q, WANG S, et al. Overcoming the strength-ductility trade-off dilemma in TiBw/TC18 composites via network architecture with trace reinforcement[J]. Materials Science and Engineering: A, 2022, 842: 143092 doi: 10.1016/j.msea.2022.143092
    [20]
    ZHU X J, ZHANG X X, QIAN M F, et al. Enhanced elastocaloric stability in NiTi alloys under shear stress[J]. Materials Science and Engineering: A, 2022, 838: 142787 doi: 10.1016/j.msea.2022.142787
    [21]
    DING H, CUI X P, WANG Z Q, et al. A new strategy for fabrication of unique heterostructured titanium laminates and visually tracking their synchronous evolution of strain partitions versus microstructure[J]. Journal of Materials Science & Technology, 2022, 107: 70-81
    [22]
    WANG S, AN Q, ZHANG R, et al. Microstructure characteristics and enhanced properties of network-structured TiB/(TA15-Si) composites via rolling deformation at different temperatures[J]. Materials Science and Engineering: A, 2022, 829: 142176 doi: 10.1016/j.msea.2021.142176
    [23]
    ZHANG B, ZHANG F M, SABA F, et al. Graphene-TiC hybrid reinforced titanium matrix composites with 3D network architecture: Fabrication, microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 2021, 859: 157777 doi: 10.1016/j.jallcom.2020.157777
    [24]
    HUANG Z Y, ZHANG X X, XIAO B, et al. Hot deformation mechanisms and microstructure evolution of SiCp/2014 Al composite[J]. Journal of Alloys and Compounds, 2017, 722: 145-157 doi: 10.1016/j.jallcom.2017.06.065
    [25]
    Institute of Metals, Chinese Academy of Sciences. A number of materials and technologies of the institute of metal materials have been used in the Tianhe core module of the space station[J]. Surface Engineering & Remanufacturing, 2021(S1): 43
    [26]
    ZHANG D Y, YU H Y, WANG A Z, et al. Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400℃[J]. Corrosion Science, 2021, 190: 109706 doi: 10.1016/j.corsci.2021.109706
    [27]
    DING Q, NI D W, NI N, et al. Thermal damage and microstructure evolution mechanisms of Cf/SiBCN composites during plasma ablation[J]. Corrosion Science, 2020, 169: 108621 doi: 10.1016/j.corsci.2020.108621
    [28]
    RUAN J, YANG J S, DONG S M, et al. Interfacial optimization of SiC nanocomposites reinforced by SiC nanowires with high volume fraction[J]. Journal of the American Ceramic Society, 2019, 102(9): 5033-5037 doi: 10.1111/jace.16513
    [29]
    PING T, ZHENG Y, LI Z Y, et al. Design and preparation of thermal control coatings with low absorption and emissivity for spacecraft[J]. Manned space Flight, 2020, 26(2): 214-221
    [30]
    PAN Yating, WEI Qiang, ZHANG Lixian, et al. Rapid preparation and evaluation of 13 X-SiC adsorption coating on cordierite surface by microwave method[J]. Surface Technology, 2021, 50(11): 129-136
    [31]
    ZHANG Zhen. Study on 5 A Zeolite Material Modified by TiO2 and Its Adsorption Properties for Space Molecular Pollutants[D]. Harbin: Harbin Institute of Technology, 2020
    [32]
    GONG Xianghua, ZU Lijie, WU Jinzhu, et al. Preparation and adsorption properties of Al2O3@5 A zeolite composites for space molecular contamination[J]. Surface Technology, 2020, 49(12): 14-22
    [33]
    MA Xuelin. Molecular Dynamics Study on the Irradiation-induced Damage in GaAs[D]. Beijing: Beijing Jiaotong University, 2020
    [34]
    FU Yulei, YUN Weidong, CAO Zhengli, et al. Numerical simulation on atomic oxygen undercutting of deorbit sail using Monte Carlo method[J]. Space Debris Research, 2020, 20(2): 14-21
    [35]
    SUI Rong, ZHANG Wenbo, JIANG Wei. Experimental study on synergistic effect of atomic oxygen and ultraviolet irradiation on mechanical properties of nylon materials[J]. Spacecraft Environment Engineering, 2021, 38(2): 171-175
    [36]
    LU Ping, GAO Hong, LI Yan, et al. Experimental study of space environmental effects on the degradation of mechanical properties of polyurethane coated fabric[J]. Spacecraft Environment Engineering, 2021, 38(2): 183-187
    [37]
    JIANG D H, WANG D, LIU G, et al. Atomic oxygen adaptability of flexible kapton/Al2O3 composite thin films prepared by ion exchange method[J]. Coatings, 2019, 9(10): 624 doi: 10.3390/coatings9100624
    [38]
    TONG P Y, WEI Q, HU N, et al. Asynchronous synergistic damage effect of atomic oxygen and space micro debris on Kapton film[J]. Coatings, 2022, 12(2): 179 doi: 10.3390/coatings12020179
    [39]
    JU Dandan, WANG Xinmin, SUN Chengyue, et al. Mechanical properties of polyimide fibers under the irradiation of space charged particles[J]. Equipment Environmental Engineering, 2020, 17(3): 1-7
    [40]
    WU Yanping, XU Haiyan, JUN Pengfei, et al. Tribological behavior of phosphate coatings in ground-based simulation environment[J]. Aerospace Shanghai, 2020, 37(3): 45-50,60
    [41]
    ZHANG Hang, ZHANG Jiaqiang, CUI Qingxin, et al. [J]. Journal of Aerospace Materials and Technology, 201, 51(5): 103-107
    [42]
    TIAN Hai, FENG Zhanzu, WANG Yi, et al. Effect of charged particle radiation on electrical properties of carbon nanotube paper[J]. Vacuum, 2022, 3: 1-8
    [43]
    WEI Q, GUO Z, XU J, et al. Atomic oxygen effect of Zr-Al-C coatings on ZrNb alloys used in space environment[J]. Applied Surface Science, 2021, 564: 150420 doi: 10.1016/j.apsusc.2021.150420
    [44]
    WEI Qiang, BI Xiaoyang, HU Ning. “YuanGuang” science experiment satellite positioning interdisciplinary integration[J]. Science Popularization in University, 2021(1): 13-17
    [45]
    China establishes first space materials and environment engineering laboratory[J]. Journal of North China University of Technology, 2000(1): 81
    [46]
    ZHOU Weijuan, ZHOU Haisu. Professor He Shiyu and his team, state key laboratory of materials behavior and evaluation technology for space environment, harbin institute of technology[J]. China Awards for Science and Technology, 2014(175): 77-80
    [47]
    FANG Xing. Radiation Protection Design of SESRI in Low Energy Range[D]. Lanzhou: Lanzhou University, 2017
    [48]
    XIAO Fugen. A future trend of the development of miniature space environment simulator[J]. Spacecraft Environment Engineering, 1999(3): 38-43
    [49]
    JOHNSON R H, MONTIERTH L D, DENNISON J R, et al. Small-scale simulation chamber for space environment survivability testing[J]. IEEE Transactions on Plasma Science, 2013, 41(12): 3453-3458 doi: 10.1109/TPS.2013.2281399
    [50]
    SONG Lihong, WEI Qiang, BAI Yu, et al. Review on the laser technology application in space environment ground simulation[J]. Optoelectronic Technology, 2013, 33(2): 96-102
    [51]
    HUANG Jianguo, HAN Jianwei. Mechanism of pulsed laser induced single particle effect[J]. Science in China G: Physics, Mechanics Astronomy, 2004, 34(2): 121-130
    [52]
    SHEN Zhigang, ZHAO Xiaohu, WANG Xin. Atomic Oxygen Effects and the Ground-Based Simulation Experiments[M]. Beijing: National Defense Industry Press, 2006
    [53]
    WEI Q, YANG G M, LIU G, et al. Effects and mechanism on Kapton film under ozone exposure in a ground near space simulator[J]. Applied Surface Science, 2018, 440: 1083-1090 doi: 10.1016/j.apsusc.2018.01.231
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(1)

    Get Citation
    PDF
    XML

    Article Metrics

    Article Views(148) PDF Downloads(49) Cited by()
    Proportional views
    Related

    Journal Introduction

    ISSN 0254-6124       CN 11-1783/V

    Copyright © Editorial Office of Chinese Journal of Space Science.  京ICP备08100722号

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return