基于Casper和Simulink的射电谱仪信号处理系统设计与实现

赵翠霞; 赵飞; 阎敬业

doi:10.11728/cjss2020.02.280

基于Casper和Simulink的射电谱仪信号处理系统设计与实现

doi: 10.11728/cjss2020.02.280

1. 中国科学院国家空间科学中心微波遥感技术重点实验室北京 100190;
2. 中国科学院大学北京 100049

基金项目:

中国科学院战略性先导科技专项A类项目资助（XDA15020204）

详细信息

作者简介:
赵翠霞,E-mail:zhaocuixia666@163.com

中图分类号: V556;P111.44
计量
- 文章访问数: 1030
- HTML全文浏览量: 105
- PDF下载量: 66
- 被引次数: 0
出版历程
- 收稿日期: 2019-01-04
- 修回日期: 2019-08-04
- 刊出日期: 2020-03-15

Design and Implementation of Signal Processing System for Radio Spectrometer Based on Casper and Simulink

1 CAS Key Laboratory of Microwave Remote Sensing, National Space Science Center, Chinese Academy of Sciences, Beijing 100190;
2 University of Chinese Academy of Sciences, Beijing 100049

摘要

摘要: 基于Casper硬件平台的射电望远镜数字系统正在被广泛应用.在Simulink中通过调用Casper模块可以实现复杂的数字信号设计，加快FPGA开发射电望远镜系统的效率.利用Casper模块和Simulink中Xilinx模块设计射电望远镜单元样机的数字信号处理单元，完成子带的抽取、下变频和整体频谱分析等功能.在Casper通用硬件平台ZYNQ7020上进行相关功能的仿真，验证了利用Casper模块和Xilinx模块设计基于FPGA的射电望远镜单元样机信号处理系统的可行性和高效性.
- 正交数字下变频 /
- 频谱分析 /
- System Generator /
- Casper模块
Abstract: The digital system of radio telescope based on Casper library is being widely used. In the Simulink, complex digital signal design can be realized by calling the Casper module. This module enables the development of signal processing functions in the Simulink graphical environment with the help of the System Generator tool, greatly improving the development efficiency of radio astronomy equipment. The Casper and Xilinx modules in Simulink are used to design the digital signal processing unit of the radio telescope unit prototype, and realize the sub-band extraction, down-conversion and overall spectrum analysis. The simulation of related functions are realized on the Casper general hardware platform ZYNQ7020, which verifies the feasibility and high efficiency for designing the digital signal processing system of radio telescope unit prototype based on FPGA by using Casper and Xilinx module.
- Quadrature digital down conversion /
- Spectrum analysis /
- System Generator /
- Casper module

HTML全文

参考文献(17)

[1]	LIU Dongliang, FORD John, LANGSTON Glen, et al. Design and test of an IBOB based wideband digital spectrometer system for a radio telescope[J]. Astron. Res. Technol., 2010, 7(1):27-32(刘东亮, FORD John, LANGSTON Glen, 等. 基于IBOB的射电望远镜宽带数字频谱仪系统的设计与测试[J]. 天文研究与技术, 2010, 7(1):27-32)
[2]	WERTHIMER D. The CASPER collaboration for high-performance open source digital radio astronomy instrumentation[C]//30th URSI General Assembly and Scientific Symposium. Istanbul:URSI, 2011:1-4
[3]	HICKISH J, ABDURASHIDOVA Z, ALI Z, et al. A decade of developing Radio-Astronomy Instrumentation using CASPER Open-Source technology[J]. J. Astron. Instrum., 2016, 5(4).DOI: 10.1142/s2251171716410014
[4]	ZHANG Huashan, LI Liangrong. Design and Implementation of Radio Spectrometer based on CASPER Platform[D]. Guiyang:Guizhou University, 2015(张华山, 李良荣. 基于CASPER平台的射电频谱仪设计与实现[D]. 贵阳:贵州大学, 2015)
[5]	LIU Yuying, FU Qijun, NING Zongjun. Microwave solar radio events[J]. Chin. J. Space Sci., 2002, 22(1):1-5(刘玉英, 傅其骏, 宁宗军. 太阳微波爆发频谱事件[J]. 空间科学学报, 2002, 22(1):1-5)
[6]	WANG Shaofei, HE Xu. An Implementation Method of Model-based Design on FPGA[D]. Chengdu:University of Electronic Science and Technology of China, 2012(王少飞, 何旭. 基于模型的设计在FPGA上的一种实现方法[D]. 成都:电子科技大学, 2012)
[7]	ZHANG Xiyang, HE Lesheng, DONG Liang, et al. Design and implementation of a digital observation terminal for solar radio observation within the 800MHz-975MHz band[J]. Astron. Res. Technol., 2014, 11(2):118-126(张西洋, 何乐生, 董亮, 等. 800-975MHz太阳射电数字观测终端的设计与实现[J]. 天文研究与技术, 2014, 11(2):118-126)
[8]	YAN Jiaming, LI Jin, HU Chufeng. DDC Technology based on digital orthogonal mixing[J]. Comput. Meas. Control, 2009, 17(1):200-202(严家明, 李瑾, 胡楚锋. 基于正交混频的数字下变频技术研究[J]. 计算机测量与控制, 2009, 17(1):200-202)
[9]	MENG Binglin, HOU Wen, LIU Xingjuan. The establishment of DDS Simulation model[J]. Shanxi Electron. Technol., 2013, 4:52-53(孟秉林, 侯文, 刘杏娟. DDS仿真模型的建立[J]. 山西电子技术, 2013, 4:52-53)
[10]	CHEN Lei, YAO Yuancheng. Design of digital down-conversion based on the System Generator[J]. Electron. Design Eng., 2012, 20(24):74-78(陈蕾, 姚远程. 基于System Generator的数字下变频设计[J]. 电子设计工程, 2012, 20(24):74-78)
[11]	CHEN Yong, LI Guangjun. Realization of High-Speed Special Digital Down Converter based on FPGA[D]. Chengdu:University of Electronic Science and Technology of China, 2005(陈勇, 李广军. 基于FPGA实现高速专用数字下变频器[D]. 成都:电子科技大学, 2005)
[12]	QU Youping, ZHOU Duan. Design of Digital Down Conversion with FPGA[D]. Xi'an:Xi'an University, 2007(屈有萍, 周端. 基于FPGA的数字下变频研究实现[D]. 西安:西安电子科技大学, 2007)
[13]	LI Yilin, XIAO Shunwen. Research of Multi Channel Digital Down Conversion Based on FPGA[D]. Nanchong:China West Normal University, 2017(李怡琳, 肖顺文. 基于FPGA的多通道数字下变频系统[D]. 南充:西华师范大学, 2017)
[14]	SHI Ruoqi. Design of digital spectrometer based on FPGA[J]. Electron. Technol. Software Eng., 2017, 22:97-99(施若其. 基于FPGA的数字频谱仪设计[J]. 电子技术与软件工程, 2017, 22:97-99)
[15]	LIU Binjie, WU Yanting. Design and implementation of FFT algorithm based on Xilinx FPGA IP Core[J]. Neijiang Technol., 2011, 32(4):154-155(刘彬杰, 吴廷婷. 基于Xilinx FPGA IP核的FFT算法的设计与实现[J]. 内江科技, 2011, 32(4):154-155)
[16]	LYFWILL. The AXI_Lite Bus of ZYNQ[OL].[2018-12-15]. https://blog.csdn.net/lyfwill/article/details/81152829
[17]	CHOOSE123. Zynq AXI Bus[OL].[2018-12-15]. https://blog.csdn.net/choose123/article/details/80055113